Washington Elite Stucco is a stucco contractor for homes and buildings in St. George, Utah.
As a stucco company in St. George, UT, we coat commercial buildings, apply stucco on new construction, remove failing wall systems and replace them, and install cement plaster with an acrylic finish where that finish fits the wall. We also repair damaged areas, remediate wall problems, resurface worn exteriors, recoat faded finishes, paint stucco, finish block and property walls, build decorative detail, and plaster interiors.
Those services let you start with the wall in front of you, whether the problem is one crack, faded color on every side of a house, or a larger building that needs a crew scheduled around tenants and access. You do not have to sort the wall into a trade category before you ask us to look at it; we can tell you whether the wall needs a patch, a new surface, a full re-stucco, or first-time plaster, then point the estimate at that work. That keeps the first call tied to the wall you own.
St. George is the largest city on our service map, has 95,342 people, and sits at 2,530 feet. If you need a stucco company in St. George, call (435) 319-6039 or send the quote form.
Get A Free Estimate
Why Us
The city gives a local stucco company a large mix of work: one cracked wall on a house, a row of related repairs in a subdivision, and several buildings that need the same crew planned across more than one address. Washington Elite Stucco schedules for that spread. We can send a crew for one elevation, group related houses in the same subdivision, or plan multi-building work from the same office.
Washington Elite Stucco is a licensed and insured stucco contractor with 15 years of experience, general liability insurance, and workers compensation coverage for the crews on your property.
Before we start, we put the main choices in writing so you can see what we will put on the wall:
A local stucco contractor should leave you with a record you can read before the first coat goes on. We use that record to keep the estimate, material order, and crew setup tied to the same decisions.
To talk through the wall you want us to look at, call (435) 319-6039.
We also work next door in Santa Clara.
Our Services
Our service menu fits the size and mix of St. George, where the same city can need small residential stucco repairs, subdivision work, commercial stucco, and interior plastering.
Commercial stucco work can include retail centers, medical and professional offices, apartment buildings, and condo projects. On multi-story elevations, we plan scaffold or boom lift access and phase the work building by building so tenants can keep using the property.
New construction stucco goes on after the builder has the house dried in, with the roof, windows, and outer weather shell ready for exterior work. On a subdivision run, we can move through several houses on one street in sequence and work to the builder schedule.
For stucco remediation, we test before we open a wall. A moisture probe checks inside the wall, meter readings show where water may be sitting, and we check kickout flashing and head flashing, the metal pieces that direct water away from roof and window edges.
Stucco removal and replacement is for a wall that has failed behind the plaster. We strip damaged material back to the sheathing, the boards under the wall covering. Then we stage the debris for haul-off on a narrow lot and rebuild with a new water barrier and metal lath, the wire sheet that holds plaster.
Stucco siding can go on framed walls, block, and other prepared surfaces when a wall has never had plaster or is being reclad. For stucco installation, we may use a three-coat system, which builds plaster in three passes, or a one-coat system, which uses one thicker plaster base with a finish over it. At the estimate, we choose by what the wall is built from and how you use it, including foam sheathing, the rigid foam board under the plaster.
Residential stucco for single-family houses, townhomes, and casitas, the small detached living spaces common on larger lots, can be small or extensive. The work may be one hairline crack or all four elevations, the outside faces of the house, and you deal with the same crew through clean-up.
On bump-outs, casitas, and second-story additions, we add stucco where new walls meet old ones. At a stucco addition, we detail the tie-in, the joint where fresh plaster meets existing plaster, so movement and color change do not leave an obvious line at the join.
Stucco resurfacing or stucco recoating fits an existing plaster wall that is sound but worn or faded at the surface. A fog coat, a thin color coat, or a new finish coat can renew the face without tear-off when the base coat underneath still holds.
Block wall stucco belongs on perimeter, courtyard, garden, and retaining walls. CMU block, the concrete block used for many property walls, can receive plaster without metal lath, and pilaster caps, the raised posts in a wall line, are finished with the same care as the wall face.
Stucco painting changes the color of a sound wall rather than replacing the plaster. Dark colors absorb more heat and fade faster in full sun, so we choose coatings for the exposure, including elastomeric coating that stretches with small movement and UV-stable pigment that resists sunlight.
Decorative stucco gives a plain wall shape by adding window surrounds, sills, bands, columns, corbels, and entry features. We build those raised or shaped pieces so openings, corners, and entries have clean edges instead of stopping as flat plaster. Banding means raised trim across the wall, and a corbel is a shaped bracket-like detail under an overhang or feature.
We plaster interior walls and ceilings too. Interior plastering can include veneer plaster, a thin hard plaster surface, over blueboard, the drywall made for that finish, or a skim coat that smooths a wall after a leak or remodel.
We repair cracks, hollow patches, and impact damage by tying the patch into the surrounding wall. A hollow patch is a spot where the plaster has separated behind the surface, and a feathered edge lets us blend sand, knockdown texture, and color into what is already there.
On an established St. George lot, a stucco contractor has to decide where the crew can safely put the equipment, material, and debris while you still need to use the property.
The mixing station, material drop, scaffold, and debris area all need space, and many established lots offer little more than a driveway and a strip of landscaping. We settle that footprint during the walk-through, the visit where we look at the wall with you before scheduling the work, so the crew arrives with the setup already agreed.
That plan also gives you practical notice. We tell you which days driveway access will be blocked, how we will work around street parking, and whether trash or recycling pickup changes where a bin or debris pile can sit.
Close-set lots put windows, frames, glass, neighboring block walls, fences, pools, pool equipment, gravel, decomposed granite, and planting within reach of dust or wet material. Decomposed granite is the compacted small stone used in many desert yards, and wet plaster droppings can be hard to remove from it cleanly.
We use masking on windows and frames, cover nearby walls and fences, place drop sheets over surfaces that need a barrier, and contain cutting or grinding dust before it spreads. Overspray, the fine material that drifts during spraying, can settle on glass, metal, and pool equipment while the wall is being coated.
St. George is large enough that you can move from a single-family street to a commercial corridor, a campus, or an event building without leaving the city. The 2020 census counted 95,342 residents here, and the metro area counted 197,680 residents.
From the street, the setting is plain: the Virgin River runs through St. George, the Santa Clara River joins it nearby, and the city sits where the Mojave Desert meets the edge of the Colorado Plateau. Interstate 15 and St. George Regional Airport give owners, tenants, students, and visitors several ways into the same Washington County center.
If you own property here, that mix shows up in the walls around you. Utah Tech University and Burns Arena bring larger public buildings into the city, Red Cliffs Mall and the Dixie Center add commercial elevations, and the old core includes the St. George Utah Temple and the Brigham Young Winter Home. The St. George Dinosaur Discovery Site is part of the same city fabric.
St. George areas give the same trade different jobs, from older patch work to new subdivision walls and yard walls between lots.
Downtown St. George includes the city's original grid around Town Square Park, and the oldest plaster in the city is found there. Stucco repair in that setting means cutting out loose or cracked material, rebuilding the patch, and blending the edge into plaster that has already weathered. We match sand and color from the wall in front of us because older plaster changes after years of sun, dust, and repairs.
Bloomington and Bloomington Hills have been part of St. George long enough for many exterior finishes to show years of full sun. Stucco resurfacing in those areas means cleaning and preparing sound plaster, then putting a fresh surface over the wall so the color and face read evenly again. When the base still holds, your wall can receive renewal work before damage reaches the deeper layers.
Desert Color has newer development work, so new construction stucco there means first coats on walls that have never been plastered. Before crews install hardscape, the fixed paving, walls, and yard surfaces, and before planting fills the lot, we have more open site access. That room lets us place lath, material drops, and equipment before the yard tightens around the house.
The Ledges is a golf neighborhood, and custom houses there often put more labor into trim than into plain wall. Decorative stucco on those elevations gives shape to window and door openings, columns, bands, and entry features. We have to form those pieces cleanly because uneven trim draws the eye faster than a small flaw on an open wall surface.
Green Valley and Dixie Downs are established areas where the stucco work is often outside the house wall itself. Here the walls between lots are block, and block wall stucco on them weathers differently from the house behind: both faces see sun, and there is no roof edge above to shed rain. We coat the wall as a freestanding surface, with both sides and the top edge planned as exposed faces.
St. George sits at the hottest end of Washington County, so a stucco contractor plans around sun, wind, and drying time.
At 2,530 feet, St. George is the lowest address on this service map and lower than Washington City at 2,894 feet. The valley floor behaves much the same from town to town, but higher communities in Washington County rise past 6,000 feet and see colder nights and a longer cold season. For your wall, that comparison changes when we can apply exterior plaster, not the materials we use to build it. A cold morning may move the start time even when the wall details stay the same.
St. George has roughly sixty days a year above 100 degrees, July average highs near 102 degrees, and 8.80 inches of precipitation in an average year. Dry air and wind pull water out of fresh plaster before hydration, the hardening reaction that needs water, can finish properly.
The residential building code Utah enforces sets waiting periods between coats; in this heat, those minimums may need more time so the plaster has enough moisture to cure. We respond by starting early, before the wall has the sun on it, and by using moist curing, which means keeping fresh coats damp while they harden in place.
St. George owners can run into two different approvals before an exterior wall changes: private association approval and city review. A stucco contractor can supply job information, but the approval itself belongs to the owner or to the public office that governs the property.
In a subdivision with an association, the CC&Rs, the recorded covenants and restrictions for the property, and the architectural committee usually govern color, finish, texture, and stucco painting changes. You obtain that approval from the committee.
We can give the committee product data sheets, which describe the coating or finish, color and texture samples, and a sample panel placed on your own wall in your own light. City permits and inspections are separate; the St. George building department tells you whether your project needs a building permit (sgcityutah.gov/departments/community_development/permits_and_inspections.php).
The St. George Central City Historic District is listed on the National Register of Historic Places, but the city's preservation page says that listing carries no restrictions and that an owner keeps their property rights. Local design review is separate from that listing.
Local design review is tied to an overlay zone, a mapped area with extra review rules. The historic preservation commission acts as the recommendation committee for the Arts District overlay, and an association's rules are separate from both the overlay and the National Register listing (sgcityutah.gov/departments/community_development/historic_preservation.php). If you are not sure which rule applies to your address, ask the city before exterior work begins.
If your approval packet needs product data or samples from us, call (435) 319-6039.
These are the questions St. George owners often need answered before they ask a stucco contractor to look at a wall.
Yes, most established St. George streets are worked this way. We make one material drop, then carry material in as needed, so a truck does not have to hold the street for the length of the job. We check street parking before staging the job and set the access path that lets the crew reach your wall.
We need your association's rules and the form its architectural committee uses. You should get approval before we order material, because a later color change means ordering different material rather than editing a note. If the committee has a preferred format, you can give us that form before the estimate visit.
Yes, summer work is normal here when the schedule is built around the sun. The crew may follow the shaded elevation around the house through the day instead of finishing one wall face from start to finish. Moist curing still belongs in the plan, even though the exact timing depends on the wall and the weather during the job.
Yes, we handle occupied building work when we agree on phasing with the building's manager before the first elevation starts. We set the program around tenant access, work zones, and the order of the elevations, so the calendar comes from how the building is used as well as how much wall we coat.
We cover the whole city and the rest of Washington County around it. Washington Elite Stucco is based in Washington City, a few minutes east along Interstate 15, so the areas named above are examples, not a limit on where we work. Being on the same side of the valley also means a look at your wall does not wait on a trip across the county.
Ask us to come and see your wall in person. We provide a free on-site estimate in St. George, and a written scope comes back within 24 to 48 hours of the visit. The visit gives us the wall, access, and surface conditions we need to price the stucco work accurately.
Call (435) 319-6039 or use the quote form to schedule the free on-site estimate at your St. George property.
